Tutkimus

Julkaisut

Viimeisimmät 50

  1. Sauer, Christian Severin; Rintala, Lotta; Roth-Berghofer, Thomas
    Two-Phased Knowledge Formalisation for Hydrometallurgical Gold Ore Process Recommendation and Validation
    Künstliche Intelligenz, 2014. Vol. 28, s. 283-295.
  2. Qureshi, Muhammad Saad; Uusi-Kyyny, Petri; Richon, DOminique, Nikiforow, Kaj; Alopaeus, Ville
    Measurements of activity coefficient at infinite dilution for some bio-oil components in water and mass transfer study of bubbles inthe dilutor
    Fluid phase equilibria, 2015. pp. 1-11.
  3. Penttilä, Anne
    Phase Equilibrium Measurements and Modeling for Alkanolamine Systems
    Aalto University publication series, Doctoral dissertations, 2015.
  4. Sundberg, Aarne
    Micro-scale Distillation and Microplants in Process Development
    Aalto University publication series, Doctoral dissertations, 2015.
  5. Liu, Zheng
    Modeling of Mass Transfer and Reactions with the Moment menthod
    Aalto University publication series, Doctoral dissertations, 2015.
  6. Saajanlehto, Meri
    Phase Equilibria of Heavy Oil Systems in Hydroprocesses: Experiments and Modeling
    Aalto University publication series, Doctoral dissertations, 2015.
  7. Forsén, Olof; Aromaa, Jari
    Experiences On Leaching Of Secondary Raw Materials For Hydrometallurgical Recovery Of Valuable Metals
  8. Forsén, Olof; Aromaa, Jari; Kekki, Antti, Stefanova, Anna
    New hydrometallurgical solutions for stainless steel dust treatment
  9. Nguyen Dang, Luong; Sinh, Le Hoang; Johansson, Leena-Sisko; Campell, Joseph; Seppälä, Jukka
    Functional Graphene by Thiol-ene Click Chemistry
    Chemistry - A European Journal, 2015. Vol. 21, pp. 1-5.
  10. Piirainen, Mari A.; de Ruijter, Jorg C.; Koskela, Essi V.; Frey, Alexander D.
    Glycoengineering of yeasts from the perspective of glycosylation efficiency
    New Biotechnology, 2014. Vol. 31, pp. 532-–537.
  11. Frey, Alexander D.; Aebi, Markus
    An enzyme-based screening system for the rapid assessment of protein N-glycosylation efficiency in yeast
    Glycobiology, 2015. Vol. 25, 252-257.
  12. Pöykiö, R.; Manskinen, K.; Oksanen, J.; Nurmesniemi, H.; Dahl, O.
    Chemical characterisation of biosludge from a wastewater treatment plant in a neutral sulphite semi-chemical pulp mill by single and sequential extraction of heavy metals and micro-/macronutrients - A case study
    Chemical Papers, 2014. Vol. 68, pp.1546-1554.
  13. Antikainen, T.; Rohumaa, A.; Hughes, M.; Kairi, M.
    Comparison of the accuracy of two on-line industrial veneer moisture content and density measurement systems
    European Journal of Wood and Wood Products, 2014. Vol. 73, pp.61-68.
  14. Antikainen, T.; Rohumaa, A.; Hunt, C.G.; Levirinne, M.; Hughes, M.
    Estimating the spread rate of urea formaldehyde adhesive on birch (Betula pendula Roth) veneer using fluorescence
    European Journal of Wood and Wood Products, 2014. Vol. 73, pp.69-75.
  15. Solala, L.; Antikainen, T.; Reza, M.; Hughes, M.; Vuorinen, T.
    Properties of high-temperature thermomechanical pulp (HT-TMP)
  16. Carillo, C.A.; Laine, J.; Rojas, O.J.
    Microemulsion systems for fiber deconstruction into cellulose nanofibrils
    ACS Applied Materials and Interfaces, 2014. Vol. 6, pp.22622-22627.
  17. Kruusenberg, Ivar; Ratso Sander; Vikkisk, Merilin; Kanninen, Petri; Kallio, Tanja; Kannan, Arunachala M.; Tammeveski, Kaido
    Highly active nitrogen-doped nanocarbon electrocatalysts for alkaline direct methanol fuel cell
    Journal of Power Sources, 2015. Vol. 281, 94-102.
  18. Kurkijärvi, Antti; Lehtonen, Juha
    Dual extraction process for the utilization of an acetone-butanol-ethanol mixture in gasoline
    Industrial & engineering chemistry research, 2014. Vol. 53, pp. 12379-12386.
  19. De Bruycker, Ruben; Anthonykutty, Jinto M.; Linnekoski, Juha; Harlin, Ali; Lehtonen, Juha; Van Geem, Kevin M.; Räsänen, Jari; Marin, Guy B.
    Assessing the Potential of Crude Tall Oil for the Production of Green-Base Chemicals: An Experimental and Kinetic Modeling Study
    Industrial & engineering chemistry research, 2014. Vol. 53, pp. 18430-18442.
  20. He, Maoshuai; Dong, Jichen; Zhang, Kali; Ding, Feng; Jiang, Hua; Loiseau, Annick; Lehtonen, Juha; Kauppinen, Esko
    Precise Determination of the Threshold Diameter for a Single-Walled Carbon Nanotube To Collapse
    ACS Nano, 2014. Vol. 8, pp. 9657-9663.
  21. Vähä-Nissi, M.; Sievänen, J.; Salo, E.; Heikkilä, P.; Kenttä, E.; Johansson, Leena-Sisko; Koskinen, J.T.; Harlin, Ali
    Atomic and Molecular Layer Deposition for Surface Modification
    Journal of solid state chemistry, 2014. Vol. 214
  22. Zoppe, J.O.; Ruottinen, V.; Ruotsalainen, J.; Rönkkä, S.; Johansson, L-S.: Hinkkanen, A.; Järvinen, K.; Seppälä, J.
    Inhibition of alphavirus infection with multivalent cellulose nanocrystals
    Biomacromolecules, 2014. Vol. 15, pp.1534–1542.
  23. Mattila, P.; Heinonen, H.; Loimula, K.; Forsman, J.; Johansson, L-S.; Tapper, U.; Mahlberg, R.; Hentze, H-P.; Auvinen, A.; Milani, R.
    Scalable synthesis and functionalization of cobalt nanoparticles for versatile magnetic separation and metal adsorption
    Journal of Nanoparticle Research, 2014. xx.
  24. Mielonen, K.; Geydt, P.; Österberg, M.; Johansson, L-S.; Backfolk, K.
    The effect of deposited -cationic-anionic polyelectrolyte multilayers on coated paper morphology and inkjet ink spreading behavior
    Journal of colloid and interface science, 2015. xx.
  25. Jansson, Jani; Taskinen, Pekka; Kaskiala, Markku
    Journal of Mining and Metallurgy - Section B.Metallurgy
    Journal of Mining and Metallurgy - Section B. Metallurgy, 2015. Vol. 51, s. 45-48.
  26. Fang, W.; Sixta, H.
    Advanced biorefinery based on the fractionation of biomass in gvalerolactone and water
    ChemSusChem, 2014.
  27. Hauru, L.K.J.; Hummel, M.; Michud, A.; Sixta, H.
    Dry-jet wet spinning of strong cellulose filaments from ionic liquid solution
    Cellulose, 2014. Vol. 21, 4471-4481.
  28. Husgafvel, R.; Pajunen, N.; Dahl, O.
    Sustainability in mining industry - how to measure it?
  29. Husgafvel, R.; Martikka, M.; Egas, A.; Ribeiro, N.; Dahl, O.
    Higher education and capacity development for sustainability and clean technologies - experiences from Mozambique
  30. Martikka, M.; Husgafvel, R.; Egas, A.; Ribeiro, N.; Dahl, O.
    Study module development on environmental engineering - experiences from Mozambican and Finnish higher education collaboration.
  31. Heino, J.; Gornostayev, S.; Watkins, G.; Suopajärvi, H.; Paananen, T.; Mäkelä, M.; Husgafvel, R.; Dahl, O.; Fabritius, T.
    Carbon Footprint Reduction Potential in the Steel Industry both in regional, EU, and Global Scale based on the experiences of the Bothnian arc metallurgical industry.
  32. Hoeger, Ingrid C.; Rojas, Orlando J.; Zhu JY
    Production of high-value nanomaterials from beetle-killed Lodgepole pine
  33. Carillo, Carlos A.; Saloni, Daniel; Rojas, Orlando J.; Laine, Janne
    Fiber pretreatment in the production of cellulose nanofibrils
  34. Salas, Carlos L.; Ago, Mariko: Rojas, Orlando J.
    Synthesis of soy protein-lignin composite sub-micron fibers
  35. Ago, Mariko; Jakes, Joseph, E.; Johansson, Leena-Sisko; Silveria, João V.W.; Park, Sunkyu; Rojas, Orlando J.
    Interfacial and thermal-mechanical properties of composite nanofibers containing lignin and cellulose nanocrystals
  36. Arcot, Lokanathan R.; Ikkala, Olli; Rojas, Orlando J.; Laine, Janne
    Size selective adsorption of proteins on nano-forest of cellulose nanocrystals
  37. Li, Shuai; Mazloumpour, Maryam; Willoughby, Julie; Rojas, Orlando J.
    Properties and energy prospects of bitumen-in-water fuel emulsions stabilized by carboxymethylated lignins
  38. Nypelö, Tiina; Marcoccia, Bruno; Rojas, Orlando J
    Lignin as precursor for functional particles
  39. Filpponen, Ilari; Junka, Karoliina; Guo, Jiagi; Laine, Janne; Rojas, Orlando J.
    Modification of cellulose nanofibrils (CNF) with luminescent carbon dots (CDs)
  40. Tayeb, S.Ali H.M.; Wing, Keith D.; Rojas, Orlando
    Soy proteins and lipoxygenases to control hydrophobic interactions in papermaking systems
  41. Uddin, Khan Mohammed Ahsan; Arcot, Lokanathan R.; Laine, Janne; Rojas, Orlando
    Role of sulfonate groups in CNC mediated silver nanoparticle synthesis
  42. Rojas, Orlando J.
    Outlook for nanocellulose production and materials
  43. Dupleix, A.; Batsale, J.C.; Kusiak, A.; Hughes, M.; Denaud, L.E.
    Experimental validation of green wood peeling assisted by IR heating - some considerations of the analytical system design
    Holzforschung, 2014. Vol. 68, 957-964.
  44. Gabryelczyk, Bartosz; Szilvay, Géza R; Singh, Vivek; Mikkilä, Joona Kostiainen, Mauri A. ; Koskinen, Jari; Linder, Markus B
    Engineering of the function of diamond-like carbon binding peptides through structural design
    Biomacromolecules, 2014.

  45. A method for detection faults or controlling and/or optimizing of an industrial process or a part of it
  46. Eskelinen, Aleksi; Zakharov, Alexey; Jämsä-Jounela, Sirkka-Liisa
    Dynamic modelling of a multiple-hearth furnace for kaolin calcination
  47. Närhi, Marko; Nordström, Katrina
    Regulation of Cell Based Therapeutic Products Intended for Human Applications in the EU.
    Regenerative Medicine, 2014. Vol. 9, 327-351.
  48. Nordström, Katrina
    Multidisciplinary Learning Affordances of Science Based Virtual World Environment
  49. Liu, Zhen; Suntio, Ville; Kuitunen, Susanna; Roininen, Jonas; Alopaeus, Ville
    Modeling of mass transfer and reactions in anisotropic biomass particles with reduced computational load
    Industrial & engineering chemistry research, 2014. Vol. 10, pp. 4096-4103.
  50. Liu, Zhen; Ahmad, Waqar; Kuitunen, Susanna; Alopaeus, Ville
    Modeling of mass transfer and degradaation of hemicelluloses in flow-through hot water extraction
    Nordic pulp & paper research journal, 2014. Vol. 4, pp. 568-583.